PMM20

TECHNICAL SPECIFICATIONS

Element : Moving coil dynamic
Polar Pattern : Hypercardioid
Frequency : 50 Hz ~ 16KHz
Sensitivity : -84 dB 3 dB ( 0 dB=1V/ microbar 1,000 Hz indicated by open circuit )
Output Impedance : 60 30% (at 1KHz)
Material : Zinc die-cast
Dimensions : 68 x 98 x 108.7 mm

PMM34

TECHNICAL SPECIFICATIONS

Polar Pattern : Uni-directional
Element : Moving Coil Dynamic
Frequency : 90 Hz ~ 18,000Hz
Impedance : 600 30% (at 1,000Hz)
Sensitivity : -74 dB 3 dB ( 0 dB=1V/microbar 1,000 Hz indicated by open circuit )

AVL 2600

TECHNICAL SPECIFICATIONS

Element : Moving coil dynamic
Polar Pattern : Uni-directional
Frequency : 60 Hz ~ 16KHz
Sensitivity : -72 dB 3 dB ( 0 dB=1V/ microbar 1,000 Hz indicated by open circuit )
Output Impedance : 250 30% (at 1KHz)
S / N Ratio : Over 65dB
Material : Zinc die-cast
Dimensions : 52 x 177.5 mm

AVL 1900ND

TECHNICAL SPECIFICATIONS

Element : Moving coil dynamic
Polar Pattern : Uni-directional
Frequency : 50 Hz ~ 18KHz
Sensitivity : -72 dB 3 dB ( 0 dB=1V/ microbar 1,000 Hz indicated by open circuit )
Output Impedance : 250 30% or 600 30% (at 1KHz)
S / N Ratio : Over 65dB
Switch : Sliding-type on/off switch (option)
Material : Zinc die-cast
Dimensions : 54 x 170 mm

AVL 103

TECHNICAL SPECIFICATIONS

Element : Moving coil dynamic
Polar Pattern : Hypercardioid
Frequency : 70 Hz ~ 17KHz
Sensitivity : -72 dB 3 dB ( 0 dB=1V/ microbar 1,000 Hz indicated by open circuit )
Output Impedance : 250 30% (at 1KHz)
S / N Ratio : Over 65dB
Switch : With sliding-type on/off switch
Material : Zinc die-cast
Dimensions : 54 x 174 mm

PHM907

TECHNICAL SPECIFICATIONS

Element : Back electret-condenser
Polar Pattern : Uni-directional
Frequency : 70 Hz ~ 16KHz
Sensitivity : -66 dB 3 dB ( 0 dB=1V/ microbar 1,000 Hz indicated by open circuit )
Output Impedance : 250 30% (at 1KHz)
Operating Voltage :
(a) Phantom power...9~52V DC, (b) Battery power...1.5V DC
S/N Ratio : Over 40 dB
(1Pa=94 dB, SPL=10dynes/Sq. cm)
Max. Input SPL : 12dB (1 KHz at 1% THD)
Material : Aluminum
Dimensions : 22 x 182 mm

PHM919

TECHNICAL SPECIFICATIONS

Polar Pattern : Omni-directional
Element : Back Electret-Condenser
Frequency : 20 Hz ~ 20,000Hz
Impedance : 250 30% (at 1,000Hz)
Sensitivity : -63 dB 3 dB ( 0 dB=1V/ microbar 1,000 Hz indicated by open circuit )
Operating Voltage : Phantom power 9V~52V D.C.

PA225

TECHNICAL SPECIFICATIONS

Frequency :
70 Hz ~ 16,000Hz
Impedance :
200 30% (at 1KHz)
Sensitivity :
-56 dB 3 dB ( 0 dB=1V/ microbar 1,000 Hz indicated by open circuit )
Operating Voltage :
Phantom Power 9V~52V D.C.
Filter Switch Position :
Flat, low cut
Attenuation Switch :
0 or -10dB